Panelwell Solid U-Connection Panel Series

Panelwell U-Connection Series Panels feature a new, easy-to-install connection method. No drilling is required, as the panels are securely connected with specially designed clips, and there are no visible screws on the surface. This provides a clean, aesthetic look while ensuring 100% waterproof performance. The unique design also saves on both installation time and costs.

The panel surface can be customized to offer UV resistance, infrared heat insulation, and light diffusion, depending on your needs. Sizes and colors are also available upon request.

The U-Connection Series Panel is commonly used in skylight systems.

Advantages of Solid U-Connection Panel Series

100% Leakage Proof

Utilizing a unique U-connection and free-floating system, Panelwell's products can withstand higher forces, such as wind and snow loads, ensuring 100% leak-proof performance under various climate conditions.

More Esthetical

Using transparent PC for all roofing and wall materials. No screws needed; connections made with aluminum profiles and glue. Creates a complete transparent system with an elegant design.

Energy Saving

Multi-layer hollow profile sheets ensure better heat insulation (thermal conductivity coefficient: 1.0 W/m²·°C). Compared to traditional sheets, they save more energy and reduce costs.

Cost Effectiveness

Low weight significantly lowers construction and installation costs. The U-connection reduces building load, allowing for increased spans or smaller supporting frames (maximum keel span of up to 2.5 meters). A self-supporting system can also be used.

Safety

With its multi-layer structure and heavy gauge thickness, combined with the high impact strength of polycarbonate, Panelwell's skylight and wall system offers enhanced safety performance.

Easier and Faster Installation

With its U-Connection, less skill and fewer procedures are required compared to traditional polycarbonate hollow sheets, resulting in savings of 50% to 80% in labor costs.

Model Description

Products Section	Thickness (mm)	Width (mm)	KB Value (W/㎡℃)	Minimum curving radius (mm)	Max light transmisslon (%)
2 Layer Multi-cell U-Connection Panel	8	600	3.4	1600	80
	10	600	3.2	2000	78
	12	600	3.0	2400	76
3 Layer Multi-cell U-Connection Panel	8	1050	2.6	1600	78
	10	1050	2.4	2000	76
	12	1050	2.7	2400	73
4 Layer Multi-cell U-Connection Panel	6	600	3	1200	77
	8	600	2.8	1600	75
	10	600	2.6	2000	72
	12	600	2.4	2400	70
6 Layer Multi-cell U-Connection Panel	12	600 / 1050	2.1	2600	60
	16	600 / 1050	1.8	3200	57
	20	600 / 1050	1.5	4000	53
	25	600 / 1050	1.2	/	50
Honeycomb U-Connection Panel	8	600	2.8	2000	70
	10	600	2.6	2400	66
	12	600	2.4	2600	64

Structural Diagram

Installation of U-Connection Panel

1 - Positioning sheet,then tighten stainless screws on the support frame.

2 - Put another sheet in close proximity to pervious part.

3 - Use a wooden hammer or by hand to press the connector in,for that to fix the two sheets together.

4 - To seal the ends with U-type sealing strips.

5 - To seal the ends of connector with PC blocks.

Contáctenos

Empresa

Producto

Case

Contacto